Latest Products:
Information Pages:
Online Catalogue | DC Motors/Gearboxes
Ref: MGB1
Quantity:
A tough open frame gearbox with all steel gears, giving 50:1 ratio when used with 10 tooth motor pinion (supplied). Output shaft is 37mm long with 13mm base diameter and 12mm end section diameter. Internal 1/4" hexagonal bore 20mm deep. Mounting plate with two M3 screws on 25mm centres to match our MDC36 style
Ref: MGB2
Similar to MGB1 but in an enclosed style. All steel gears, 50:1 ratio when motor is fitted with 10 tooth pinion (supplied). Output shaft is 12mm diameter x 24mm long with 1/4" hexagonal bore 20mm deep. Output shaft has spring loaded 'lock' facility (originally for use in power screwdriver). The outer shaft can be removed and the body cut down to produce a more compact style with 3.17mm diameter output shaft 20mm long (see picture). With mounting plate and M3 screws for MDC36 style motors.
Ref: MDC36
A range of three motors with dimensions to match the above gearboxes. Case size 35.8mm dia. x 50mm long, shaft 3.17mm x 8.5mm. Fixing is by 2 M3 tapped holes 25mm apart on the front face. The 10 tooth pinion supplied with MGB1 and MGB2 is a tight push fit onto the motor shaft (** press on carefully using a vice - don't use a hammer or it will weaken the motor magnets).
