MD24

MD24-200 large 'Size 23' hybrid 200 step 4-phase 6 Wire stepper motor. 4V/ 1.1A per phase unipolar (8V/ 1.1A bipolar). Body 56.4mm dia x 43mm deep. Square flange with tapped M4 fixing holes on 47.14mm centres. 1/4" (6.35mm) x 20mm shaft. High quality ball race bearings spring loaded for precision and zero shaft end float. 5.2mH per phase, 57 Ncm holding and low speed torque. Max step rate 1000/ sec when driven from 24 volts via current limiting resistance. Heat resistant wires 500mm long (can be driven in bipolar or unipolar mode). Fitted with plastic pulley and opto interrupter moulded onto press fit brass insert. Easily removed with care.