MH42-200 Hybrid 200-step 4-phase unipolar (6 wire). Standard 40mm square motor with 20mm long x 5 mm ø shaft. Very good quality ball-race bearings front and rear, giving 'zero' shaft end float. Two M3 studs on front face for fixing on standard 30mm square centres. 5V 0.28A per phase (2 - 36 ohm centre tapped windings) . Runs well at 5V or can be used at higher voltage with series reisistors for improved high speed running. For example run at 12V with two 27R 3W reisistors - one in series with each centre tap.
Six 300mm long leads with tinned ends.
